Two post lift with electromagnetic Locking and 3 + 3 stage arms, 4.5T BD-4500VEL33

Two post lift with electromagnetic Locking and 3 + 3 stage arms, 4.5T BD-4500VEL33

Two post lift with overhead connection - a car lift intended for their lifting and repair work. With its help, you will be able to easily access the bottom of vehicles, chassis, etc. This type of lift has two vertical columns with synchronous three-stage lifting pawls. The hoist with clean floor design, gives you a free, clean passage between the columns without any obstacles, the synchronization ropes are raised above the columns. This hoist design is very useful in places where there is very frequent and fast movement. The lifter has a built-in reliable electric motor which creates hydraulic pressure to lift vehicles as per your need. Such systems are a time-tested solution that provides reliable and robust lifting capacity for handling vehicles of various sizes and types.

Features:

• The lift columns are synchronized through the top
• The lift is sold with 3 + 3 step arms
• The lift has a compact design, reduced wear and tear of parts and minimized probability of breakdowns.
• Posts use hydraulic cylinders designed and manufactured according to ANSI standards.
• Self-lubricating UHMW polyethylene sliders and brass bushings.
• Two-point release mechanism, manufactured to the standard of double protection.
• The standard extra-symmetrical lifting pawls offer the option of being used as symmetrical or asymmetric pawls.
• The reinforced "carriage" for attaching the arms and the columns are made of thicker metal.

Technical parameters:

• Lift capacity: 4500 kg
• Lifting time: 60 - 65 sec.
• Lift height: 1900 mm
• Total width of the lift: 3390 mm
• Width between post: 2900 mm
• Minimum height of arms: 100 mm
• Total lift height: 4300 mm
• Lift weight: 670 kg
• Electric motor power: 2.2 kW
• Power supply voltage: 400 V / 50 Hz / 3 phases
• Hydraulic pressure: 21 MPa
• Color code: RAL7021
• Arms release protection: electromagnetic.
• Arms length, 3 steps: 750 – 1500 mm
• Noise level: < 80 dB
• Column metal thickness: 5.75 mm
• CE certificate