Double post lifter with electromagnetic safety locking, 3 + 3-steps arms 4t BD-4000EL33

Double post lifter with electromagnetic safety locking, 3 + 3-steps arms 4t BD-4000EL33

• The elevator columns are synchronized through the bottom
• The complete set of the lift consists of the following components: two columns, lifting arms, electric motor and hydraulic cylinders
• The hydraulic pressure for lifting is generated in the hydraulic pump and from there is supplied to the lifting cylinders. The supplied hydraulic fluid pressure is regulated by electromagnetic valves
• The lifting arms are attached to the lifting cylinders, so when the cylinder rises, the pawls are also lifted directly
• When the lifter's arms are raised, their protection mechanism automatically locks into the protective positions. This protects the lift from a sudden drop of the arms in the event of a failure in the hydraulic system and a loss of pressure
• Reinforced arm attachment "carriage"

Technical parameters:

• Lift load capacity: 4000 kg
• Lifting time: 45 s
• Lift height: 1900 mm
• Total width of the lift: 3300 mm
• Width between columns: 2800 mm
• Post height: 2800 mm
• Maximum width of serviced car: 2500 mm
• Minimum height of arms: 100 mm
• Electric motor: 2.2 kW
• Power supply voltage: 400 V / 50 Hz / 3 phases
• Color code: RAL7021
• Arm fall protection: Electromagnetic paw release
• Length of arms: 750 - 1500 mm, three stages
• CE certificate